/* --------------------------------------------------------------------------- Open Asset Import Library (assimp) --------------------------------------------------------------------------- Copyright (c) 2006-2018, assimp team All rights reserved. Redistribution and use of this software in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the assimp team, nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission of the assimp team. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. --------------------------------------------------------------------------- */ /** @file DXFLoader.cpp * @brief Implementation of the DXF importer class */ #ifndef ASSIMP_BUILD_NO_DXF_IMPORTER #include "DXFLoader.h" #include #include "ConvertToLHProcess.h" #include #include "DXFHelper.h" #include #include #include #include using namespace Assimp; // AutoCAD Binary DXF #define AI_DXF_BINARY_IDENT ("AutoCAD Binary DXF\r\n\x1a\0") #define AI_DXF_BINARY_IDENT_LEN (24) // default vertex color that all uncolored vertices will receive #define AI_DXF_DEFAULT_COLOR aiColor4D(0.6f,0.6f,0.6f,0.6f) // color indices for DXF - 16 are supported, the table is // taken directly from the DXF spec. static aiColor4D g_aclrDxfIndexColors[] = { aiColor4D (0.6f, 0.6f, 0.6f, 1.0f), aiColor4D (1.0f, 0.0f, 0.0f, 1.0f), // red aiColor4D (0.0f, 1.0f, 0.0f, 1.0f), // green aiColor4D (0.0f, 0.0f, 1.0f, 1.0f), // blue aiColor4D (0.3f, 1.0f, 0.3f, 1.0f), // light green aiColor4D (0.3f, 0.3f, 1.0f, 1.0f), // light blue aiColor4D (1.0f, 0.3f, 0.3f, 1.0f), // light red aiColor4D (1.0f, 0.0f, 1.0f, 1.0f), // pink aiColor4D (1.0f, 0.6f, 0.0f, 1.0f), // orange aiColor4D (0.6f, 0.3f, 0.0f, 1.0f), // dark orange aiColor4D (1.0f, 1.0f, 0.0f, 1.0f), // yellow aiColor4D (0.3f, 0.3f, 0.3f, 1.0f), // dark gray aiColor4D (0.8f, 0.8f, 0.8f, 1.0f), // light gray aiColor4D (0.0f, 00.f, 0.0f, 1.0f), // black aiColor4D (1.0f, 1.0f, 1.0f, 1.0f), // white aiColor4D (0.6f, 0.0f, 1.0f, 1.0f) // violet }; #define AI_DXF_NUM_INDEX_COLORS (sizeof(g_aclrDxfIndexColors)/sizeof(g_aclrDxfIndexColors[0])) #define AI_DXF_ENTITIES_MAGIC_BLOCK "$ASSIMP_ENTITIES_MAGIC" static const aiImporterDesc desc = { "Drawing Interchange Format (DXF) Importer", "", "", "", aiImporterFlags_SupportTextFlavour | aiImporterFlags_LimitedSupport, 0, 0, 0, 0, "dxf" }; // ------------------------------------------------------------------------------------------------ // Constructor to be privately used by Importer DXFImporter::DXFImporter() {} // ------------------------------------------------------------------------------------------------ // Destructor, private as well DXFImporter::~DXFImporter() {} // ------------------------------------------------------------------------------------------------ // Returns whether the class can handle the format of the given file. bool DXFImporter::CanRead( const std::string& pFile, IOSystem* pIOHandler, bool checkSig ) const { const std::string& extension = GetExtension( pFile ); if ( extension == "dxf" ) { return true; } if ( extension.empty() || checkSig ) { static const char *pTokens[] = { "SECTION", "HEADER", "ENDSEC", "BLOCKS" }; return BaseImporter::SearchFileHeaderForToken(pIOHandler, pFile, pTokens, 4, 32 ); } return false; } // ------------------------------------------------------------------------------------------------ // Get a list of all supported file extensions const aiImporterDesc* DXFImporter::GetInfo () const { return &desc; } // ------------------------------------------------------------------------------------------------ // Imports the given file into the given scene structure. void DXFImporter::InternReadFile( const std::string& pFile, aiScene* pScene, IOSystem* pIOHandler) { std::shared_ptr file = std::shared_ptr( pIOHandler->Open( pFile) ); // Check whether we can read the file if( file.get() == NULL) { throw DeadlyImportError( "Failed to open DXF file " + pFile + ""); } // check whether this is a binaray DXF file - we can't read binary DXF files :-( char buff[AI_DXF_BINARY_IDENT_LEN+1] = {0}; file->Read(buff,AI_DXF_BINARY_IDENT_LEN,1); if (!strncmp(AI_DXF_BINARY_IDENT,buff,AI_DXF_BINARY_IDENT_LEN)) { throw DeadlyImportError("DXF: Binary files are not supported at the moment"); } // DXF files can grow very large, so read them via the StreamReader, // which will choose a suitable strategy. file->Seek(0,aiOrigin_SET); StreamReaderLE stream( file ); DXF::LineReader reader (stream); DXF::FileData output; // now get all lines of the file and process top-level sections bool eof = false; while(!reader.End()) { // blocks table - these 'build blocks' are later (in ENTITIES) // referenced an included via INSERT statements. if (reader.Is(2,"BLOCKS")) { ParseBlocks(reader,output); continue; } // primary entity table if (reader.Is(2,"ENTITIES")) { ParseEntities(reader,output); continue; } // skip unneeded sections entirely to avoid any problems with them // altogether. else if (reader.Is(2,"CLASSES") || reader.Is(2,"TABLES")) { SkipSection(reader); continue; } else if (reader.Is(2,"HEADER")) { ParseHeader(reader,output); continue; } // comments else if (reader.Is(999)) { ASSIMP_LOG_INFO_F("DXF Comment: ", reader.Value()); } // don't read past the official EOF sign else if (reader.Is(0,"EOF")) { eof = true; break; } ++reader; } if (!eof) { ASSIMP_LOG_WARN("DXF: EOF reached, but did not encounter DXF EOF marker"); } ConvertMeshes(pScene,output); // Now rotate the whole scene by 90 degrees around the x axis to convert from AutoCAD's to Assimp's coordinate system pScene->mRootNode->mTransformation = aiMatrix4x4( 1.f,0.f,0.f,0.f, 0.f,0.f,1.f,0.f, 0.f,-1.f,0.f,0.f, 0.f,0.f,0.f,1.f) * pScene->mRootNode->mTransformation; } // ------------------------------------------------------------------------------------------------ void DXFImporter::ConvertMeshes(aiScene* pScene, DXF::FileData& output) { // the process of resolving all the INSERT statements can grow the // poly-count excessively, so log the original number. // XXX Option to import blocks as separate nodes? if (!DefaultLogger::isNullLogger()) { unsigned int vcount = 0, icount = 0; for (const DXF::Block& bl : output.blocks) { for (std::shared_ptr pl : bl.lines) { vcount += static_cast(pl->positions.size()); icount += static_cast(pl->counts.size()); } } ASSIMP_LOG_DEBUG_F("DXF: Unexpanded polycount is ", icount, ", vertex count is ", vcount); } if (! output.blocks.size() ) { throw DeadlyImportError("DXF: no data blocks loaded"); } DXF::Block* entities( nullptr ); // index blocks by name DXF::BlockMap blocks_by_name; for (DXF::Block& bl : output.blocks) { blocks_by_name[bl.name] = &bl; if ( !entities && bl.name == AI_DXF_ENTITIES_MAGIC_BLOCK ) { entities = &bl; } } if (!entities) { throw DeadlyImportError("DXF: no ENTITIES data block loaded"); } typedef std::map LayerMap; LayerMap layers; std::vector< std::vector< const DXF::PolyLine*> > corr; // now expand all block references in the primary ENTITIES block // XXX this involves heavy memory copying, consider a faster solution for future versions. ExpandBlockReferences(*entities,blocks_by_name); unsigned int cur = 0; for (std::shared_ptr pl : entities->lines) { if (pl->positions.size()) { std::map::iterator it = layers.find(pl->layer); if (it == layers.end()) { ++pScene->mNumMeshes; layers[pl->layer] = cur++; std::vector< const DXF::PolyLine* > pv; pv.push_back(&*pl); corr.push_back(pv); } else { corr[(*it).second].push_back(&*pl); } } } if (!pScene->mNumMeshes) { throw DeadlyImportError("DXF: this file contains no 3d data"); } pScene->mMeshes = new aiMesh*[ pScene->mNumMeshes ] (); for(const LayerMap::value_type& elem : layers){ aiMesh* const mesh = pScene->mMeshes[elem.second] = new aiMesh(); mesh->mName.Set(elem.first); unsigned int cvert = 0,cface = 0; for(const DXF::PolyLine* pl : corr[elem.second]){ // sum over all faces since we need to 'verbosify' them. cvert += std::accumulate(pl->counts.begin(),pl->counts.end(),0); cface += static_cast(pl->counts.size()); } aiVector3D* verts = mesh->mVertices = new aiVector3D[cvert]; aiColor4D* colors = mesh->mColors[0] = new aiColor4D[cvert]; aiFace* faces = mesh->mFaces = new aiFace[cface]; mesh->mNumVertices = cvert; mesh->mNumFaces = cface; unsigned int prims = 0; unsigned int overall_indices = 0; for(const DXF::PolyLine* pl : corr[elem.second]){ std::vector::const_iterator it = pl->indices.begin(); for(unsigned int facenumv : pl->counts) { aiFace& face = *faces++; face.mIndices = new unsigned int[face.mNumIndices = facenumv]; for (unsigned int i = 0; i < facenumv; ++i) { face.mIndices[i] = overall_indices++; ai_assert(pl->positions.size() == pl->colors.size()); if (*it >= pl->positions.size()) { throw DeadlyImportError("DXF: vertex index out of bounds"); } *verts++ = pl->positions[*it]; *colors++ = pl->colors[*it++]; } // set primitive flags now, this saves the extra pass in ScenePreprocessor. switch(face.mNumIndices) { case 1: prims |= aiPrimitiveType_POINT; break; case 2: prims |= aiPrimitiveType_LINE; break; case 3: prims |= aiPrimitiveType_TRIANGLE; break; default: prims |= aiPrimitiveType_POLYGON; break; } } } mesh->mPrimitiveTypes = prims; mesh->mMaterialIndex = 0; } GenerateHierarchy(pScene,output); GenerateMaterials(pScene,output); } // ------------------------------------------------------------------------------------------------ void DXFImporter::ExpandBlockReferences(DXF::Block& bl,const DXF::BlockMap& blocks_by_name) { for (const DXF::InsertBlock& insert : bl.insertions) { // first check if the referenced blocks exists ... const DXF::BlockMap::const_iterator it = blocks_by_name.find(insert.name); if (it == blocks_by_name.end()) { ASSIMP_LOG_ERROR_F("DXF: Failed to resolve block reference: ", insert.name,"; skipping" ); continue; } // XXX this would be the place to implement recursive expansion if needed. const DXF::Block& bl_src = *(*it).second; for (std::shared_ptr pl_in : bl_src.lines) { std::shared_ptr pl_out = std::shared_ptr(new DXF::PolyLine(*pl_in)); if (bl_src.base.Length() || insert.scale.x!=1.f || insert.scale.y!=1.f || insert.scale.z!=1.f || insert.angle || insert.pos.Length()) { // manual coordinate system transformation // XXX order aiMatrix4x4 trafo, tmp; aiMatrix4x4::Translation(-bl_src.base,trafo); trafo *= aiMatrix4x4::Scaling(insert.scale,tmp); trafo *= aiMatrix4x4::Translation(insert.pos,tmp); // XXX rotation currently ignored - I didn't find an appropriate sample model. if (insert.angle != 0.f) { ASSIMP_LOG_WARN("DXF: BLOCK rotation not currently implemented"); } for (aiVector3D& v : pl_out->positions) { v *= trafo; } } bl.lines.push_back(pl_out); } } } // ------------------------------------------------------------------------------------------------ void DXFImporter::GenerateMaterials(aiScene* pScene, DXF::FileData& /*output*/) { // generate an almost-white default material. Reason: // the default vertex color is GREY, so we are // already at Assimp's usual default color. // generate a default material aiMaterial* pcMat = new aiMaterial(); aiString s; s.Set(AI_DEFAULT_MATERIAL_NAME); pcMat->AddProperty(&s, AI_MATKEY_NAME); aiColor4D clrDiffuse(0.9f,0.9f,0.9f,1.0f); pcMat->AddProperty(&clrDiffuse,1,AI_MATKEY_COLOR_DIFFUSE); clrDiffuse = aiColor4D(1.0f,1.0f,1.0f,1.0f); pcMat->AddProperty(&clrDiffuse,1,AI_MATKEY_COLOR_SPECULAR); clrDiffuse = aiColor4D(0.05f,0.05f,0.05f,1.0f); pcMat->AddProperty(&clrDiffuse,1,AI_MATKEY_COLOR_AMBIENT); pScene->mNumMaterials = 1; pScene->mMaterials = new aiMaterial*[1]; pScene->mMaterials[0] = pcMat; } // ------------------------------------------------------------------------------------------------ void DXFImporter::GenerateHierarchy(aiScene* pScene, DXF::FileData& /*output*/) { // generate the output scene graph, which is just the root node with a single child for each layer. pScene->mRootNode = new aiNode(); pScene->mRootNode->mName.Set(""); if (1 == pScene->mNumMeshes) { pScene->mRootNode->mMeshes = new unsigned int[ pScene->mRootNode->mNumMeshes = 1 ]; pScene->mRootNode->mMeshes[0] = 0; } else { pScene->mRootNode->mChildren = new aiNode*[ pScene->mRootNode->mNumChildren = pScene->mNumMeshes ]; for (unsigned int m = 0; m < pScene->mRootNode->mNumChildren;++m) { aiNode* p = pScene->mRootNode->mChildren[m] = new aiNode(); p->mName = pScene->mMeshes[m]->mName; p->mMeshes = new unsigned int[p->mNumMeshes = 1]; p->mMeshes[0] = m; p->mParent = pScene->mRootNode; } } } // ------------------------------------------------------------------------------------------------ void DXFImporter::SkipSection(DXF::LineReader& reader) { for( ;!reader.End() && !reader.Is(0,"ENDSEC"); reader++); } // ------------------------------------------------------------------------------------------------ void DXFImporter::ParseHeader(DXF::LineReader& reader, DXF::FileData& ) { for( ;!reader.End() && !reader.Is(0,"ENDSEC"); reader++); } // ------------------------------------------------------------------------------------------------ void DXFImporter::ParseBlocks(DXF::LineReader& reader, DXF::FileData& output) { while( !reader.End() && !reader.Is(0,"ENDSEC")) { if (reader.Is(0,"BLOCK")) { ParseBlock(++reader,output); continue; } ++reader; } ASSIMP_LOG_DEBUG_F("DXF: got ", output.blocks.size()," entries in BLOCKS" ); } // ------------------------------------------------------------------------------------------------ void DXFImporter::ParseBlock(DXF::LineReader& reader, DXF::FileData& output) { // push a new block onto the stack. output.blocks.push_back( DXF::Block() ); DXF::Block& block = output.blocks.back(); while( !reader.End() && !reader.Is(0,"ENDBLK")) { switch(reader.GroupCode()) { case 2: block.name = reader.Value(); break; case 10: block.base.x = reader.ValueAsFloat(); break; case 20: block.base.y = reader.ValueAsFloat(); break; case 30: block.base.z = reader.ValueAsFloat(); break; } if (reader.Is(0,"POLYLINE")) { ParsePolyLine(++reader,output); continue; } // XXX is this a valid case? if (reader.Is(0,"INSERT")) { ASSIMP_LOG_WARN("DXF: INSERT within a BLOCK not currently supported; skipping"); for( ;!reader.End() && !reader.Is(0,"ENDBLK"); ++reader); break; } else if (reader.Is(0,"3DFACE") || reader.Is(0,"LINE") || reader.Is(0,"3DLINE")) { //http://sourceforge.net/tracker/index.php?func=detail&aid=2970566&group_id=226462&atid=1067632 Parse3DFace(++reader, output); continue; } ++reader; } } // ------------------------------------------------------------------------------------------------ void DXFImporter::ParseEntities(DXF::LineReader& reader, DXF::FileData& output) { // push a new block onto the stack. output.blocks.push_back( DXF::Block() ); DXF::Block& block = output.blocks.back(); block.name = AI_DXF_ENTITIES_MAGIC_BLOCK; while( !reader.End() && !reader.Is(0,"ENDSEC")) { if (reader.Is(0,"POLYLINE")) { ParsePolyLine(++reader,output); continue; } else if (reader.Is(0,"INSERT")) { ParseInsertion(++reader,output); continue; } else if (reader.Is(0,"3DFACE") || reader.Is(0,"LINE") || reader.Is(0,"3DLINE")) { //http://sourceforge.net/tracker/index.php?func=detail&aid=2970566&group_id=226462&atid=1067632 Parse3DFace(++reader, output); continue; } ++reader; } ASSIMP_LOG_DEBUG_F( "DXF: got ", block.lines.size()," polylines and ", block.insertions.size(), " inserted blocks in ENTITIES" ); } void DXFImporter::ParseInsertion(DXF::LineReader& reader, DXF::FileData& output) { output.blocks.back().insertions.push_back( DXF::InsertBlock() ); DXF::InsertBlock& bl = output.blocks.back().insertions.back(); while( !reader.End() && !reader.Is(0)) { switch(reader.GroupCode()) { // name of referenced block case 2: bl.name = reader.Value(); break; // translation case 10: bl.pos.x = reader.ValueAsFloat(); break; case 20: bl.pos.y = reader.ValueAsFloat(); break; case 30: bl.pos.z = reader.ValueAsFloat(); break; // scaling case 41: bl.scale.x = reader.ValueAsFloat(); break; case 42: bl.scale.y = reader.ValueAsFloat(); break; case 43: bl.scale.z = reader.ValueAsFloat(); break; // rotation angle case 50: bl.angle = reader.ValueAsFloat(); break; } reader++; } } #define DXF_POLYLINE_FLAG_CLOSED 0x1 #define DXF_POLYLINE_FLAG_3D_POLYLINE 0x8 #define DXF_POLYLINE_FLAG_3D_POLYMESH 0x10 #define DXF_POLYLINE_FLAG_POLYFACEMESH 0x40 // ------------------------------------------------------------------------------------------------ void DXFImporter::ParsePolyLine(DXF::LineReader& reader, DXF::FileData& output) { output.blocks.back().lines.push_back( std::shared_ptr( new DXF::PolyLine() ) ); DXF::PolyLine& line = *output.blocks.back().lines.back(); unsigned int iguess = 0, vguess = 0; while( !reader.End() && !reader.Is(0,"ENDSEC")) { if (reader.Is(0,"VERTEX")) { ParsePolyLineVertex(++reader,line); if (reader.Is(0,"SEQEND")) { break; } continue; } switch(reader.GroupCode()) { // flags --- important that we know whether it is a // polyface mesh or 'just' a line. case 70: if (!line.flags) { line.flags = reader.ValueAsSignedInt(); } break; // optional number of vertices case 71: vguess = reader.ValueAsSignedInt(); line.positions.reserve(vguess); break; // optional number of faces case 72: iguess = reader.ValueAsSignedInt(); line.indices.reserve(iguess); break; // 8 specifies the layer on which this line is placed on case 8: line.layer = reader.Value(); break; } reader++; } //if (!(line.flags & DXF_POLYLINE_FLAG_POLYFACEMESH)) { // DefaultLogger::get()->warn((Formatter::format("DXF: polyline not currently supported: "),line.flags)); // output.blocks.back().lines.pop_back(); // return; //} if (vguess && line.positions.size() != vguess) { ASSIMP_LOG_WARN_F("DXF: unexpected vertex count in polymesh: ", line.positions.size(),", expected ", vguess ); } if (line.flags & DXF_POLYLINE_FLAG_POLYFACEMESH ) { if (line.positions.size() < 3 || line.indices.size() < 3) { ASSIMP_LOG_WARN("DXF: not enough vertices for polymesh; ignoring"); output.blocks.back().lines.pop_back(); return; } // if these numbers are wrong, parsing might have gone wild. // however, the docs state that applications are not required // to set the 71 and 72 fields, respectively, to valid values. // So just fire a warning. if (iguess && line.counts.size() != iguess) { ASSIMP_LOG_WARN_F( "DXF: unexpected face count in polymesh: ", line.counts.size(),", expected ", iguess ); } } else if (!line.indices.size() && !line.counts.size()) { // a poly-line - so there are no indices yet. size_t guess = line.positions.size() + (line.flags & DXF_POLYLINE_FLAG_CLOSED ? 1 : 0); line.indices.reserve(guess); line.counts.reserve(guess/2); for (unsigned int i = 0; i < line.positions.size()/2; ++i) { line.indices.push_back(i*2); line.indices.push_back(i*2+1); line.counts.push_back(2); } // closed polyline? if (line.flags & DXF_POLYLINE_FLAG_CLOSED) { line.indices.push_back(static_cast(line.positions.size()-1)); line.indices.push_back(0); line.counts.push_back(2); } } } #define DXF_VERTEX_FLAG_PART_OF_POLYFACE 0x80 #define DXF_VERTEX_FLAG_HAS_POSITIONS 0x40 // ------------------------------------------------------------------------------------------------ void DXFImporter::ParsePolyLineVertex(DXF::LineReader& reader, DXF::PolyLine& line) { unsigned int cnti = 0, flags = 0; unsigned int indices[4]; aiVector3D out; aiColor4D clr = AI_DXF_DEFAULT_COLOR; while( !reader.End() ) { if (reader.Is(0)) { // SEQEND or another VERTEX break; } switch (reader.GroupCode()) { case 8: // layer to which the vertex belongs to - assume that // this is always the layer the top-level poly-line // entity resides on as well. if(reader.Value() != line.layer) { ASSIMP_LOG_WARN("DXF: expected vertex to be part of a poly-face but the 0x128 flag isn't set"); } break; case 70: flags = reader.ValueAsUnsignedInt(); break; // VERTEX COORDINATES case 10: out.x = reader.ValueAsFloat();break; case 20: out.y = reader.ValueAsFloat();break; case 30: out.z = reader.ValueAsFloat();break; // POLYFACE vertex indices case 71: case 72: case 73: case 74: if (cnti == 4) { ASSIMP_LOG_WARN("DXF: more than 4 indices per face not supported; ignoring"); break; } indices[cnti++] = reader.ValueAsUnsignedInt(); break; // color case 62: clr = g_aclrDxfIndexColors[reader.ValueAsUnsignedInt() % AI_DXF_NUM_INDEX_COLORS]; break; }; reader++; } if (line.flags & DXF_POLYLINE_FLAG_POLYFACEMESH && !(flags & DXF_VERTEX_FLAG_PART_OF_POLYFACE)) { ASSIMP_LOG_WARN("DXF: expected vertex to be part of a polyface but the 0x128 flag isn't set"); } if (cnti) { line.counts.push_back(cnti); for (unsigned int i = 0; i < cnti; ++i) { // IMPORTANT NOTE: POLYMESH indices are ONE-BASED if (indices[i] == 0) { ASSIMP_LOG_WARN("DXF: invalid vertex index, indices are one-based."); --line.counts.back(); continue; } line.indices.push_back(indices[i]-1); } } else { line.positions.push_back(out); line.colors.push_back(clr); } } // ------------------------------------------------------------------------------------------------ void DXFImporter::Parse3DFace(DXF::LineReader& reader, DXF::FileData& output) { // (note) this is also used for for parsing line entities, so we // must handle the vertex_count == 2 case as well. output.blocks.back().lines.push_back( std::shared_ptr( new DXF::PolyLine() ) ); DXF::PolyLine& line = *output.blocks.back().lines.back(); aiVector3D vip[4]; aiColor4D clr = AI_DXF_DEFAULT_COLOR; bool b[4] = {false,false,false,false}; while( !reader.End() ) { // next entity with a groupcode == 0 is probably already the next vertex or polymesh entity if (reader.GroupCode() == 0) { break; } switch (reader.GroupCode()) { // 8 specifies the layer case 8: line.layer = reader.Value(); break; // x position of the first corner case 10: vip[0].x = reader.ValueAsFloat(); b[2] = true; break; // y position of the first corner case 20: vip[0].y = reader.ValueAsFloat(); b[2] = true; break; // z position of the first corner case 30: vip[0].z = reader.ValueAsFloat(); b[2] = true; break; // x position of the second corner case 11: vip[1].x = reader.ValueAsFloat(); b[3] = true; break; // y position of the second corner case 21: vip[1].y = reader.ValueAsFloat(); b[3] = true; break; // z position of the second corner case 31: vip[1].z = reader.ValueAsFloat(); b[3] = true; break; // x position of the third corner case 12: vip[2].x = reader.ValueAsFloat(); b[0] = true; break; // y position of the third corner case 22: vip[2].y = reader.ValueAsFloat(); b[0] = true; break; // z position of the third corner case 32: vip[2].z = reader.ValueAsFloat(); b[0] = true; break; // x position of the fourth corner case 13: vip[3].x = reader.ValueAsFloat(); b[1] = true; break; // y position of the fourth corner case 23: vip[3].y = reader.ValueAsFloat(); b[1] = true; break; // z position of the fourth corner case 33: vip[3].z = reader.ValueAsFloat(); b[1] = true; break; // color case 62: clr = g_aclrDxfIndexColors[reader.ValueAsUnsignedInt() % AI_DXF_NUM_INDEX_COLORS]; break; }; ++reader; } // the fourth corner may even be identical to the third, // in this case we treat it as if it didn't exist. if (vip[3] == vip[2]) { b[1] = false; } // sanity checks to see if we got something meaningful if ((b[1] && !b[0]) || !b[2] || !b[3]) { ASSIMP_LOG_WARN("DXF: unexpected vertex setup in 3DFACE/LINE/FACE entity; ignoring"); output.blocks.back().lines.pop_back(); return; } const unsigned int cnt = (2+(b[0]?1:0)+(b[1]?1:0)); line.counts.push_back(cnt); for (unsigned int i = 0; i < cnt; ++i) { line.indices.push_back(static_cast(line.positions.size())); line.positions.push_back(vip[i]); line.colors.push_back(clr); } } #endif // !! ASSIMP_BUILD_NO_DXF_IMPORTER