- IFC reader regenerated from schema to include IfcArbitraryProfileDefWithVoids

- implemented IfcArbitraryProfileDefWithVoids to fix solar panel covers in test\models-nonbsd\IFC\rac_basic_sample_project.ifc
- warning: another dirty hack on top of dirty hacks - one day all these CSG implementations will blow up in our faces. Mark my words.

code/IFCGeometry.cpp

@@ -522,43 +522,23 @@ IfcMatrix3 DerivePlaneCoordinateSpace(const TempMesh& curmesh, bool& ok, IfcVect
 	return m;
 }
 
-
+// Extrudes the given polygon along the direction, converts it into an opening or applies all openings as necessary.
-// ------------------------------------------------------------------------------------------------
+void ProcessExtrudedArea(const IfcExtrudedAreaSolid& solid, const TempMesh& curve,
-void ProcessExtrudedAreaSolid(const IfcExtrudedAreaSolid& solid, TempMesh& result, 
+	const IfcVector3& extrusionDir, TempMesh& result, ConversionData &conv, bool collect_openings)
-	ConversionData& conv, bool collect_openings)
 {
-	TempMesh meshout;
+	// Outline: 'curve' is now a list of vertex points forming the underlying profile, extrude along the given axis, 
-	
+	// forming new triangles.
-	// First read the profile description
+	const bool has_area = solid.SweptArea->ProfileType == "AREA" && curve.verts.size() > 2;
-	if(!ProcessProfile(*solid.SweptArea,meshout,conv) || meshout.verts.size()<=1) {
-		return;
-	}
-
-	IfcVector3 dir;
-	ConvertDirection(dir,solid.ExtrudedDirection);
-
-	dir *= solid.Depth; /*
-	if(conv.collect_openings && !conv.apply_openings) {
-		dir *= 1000.0;
-	} */
-
-	// Outline: assuming that `meshout.verts` is now a list of vertex points forming 
-	// the underlying profile, extrude along the given axis, forming new
-	// triangles.
-	
-	std::vector<IfcVector3>& in = meshout.verts;
-	const size_t size=in.size();
-
-	const bool has_area = solid.SweptArea->ProfileType == "AREA" && size>2;
 	if( solid.Depth < 1e-6 ) {
 		if( has_area ) {
-			result = meshout;
+			result.Append(curve);
 		}
 		return;
 	}
 
-	result.verts.reserve(size*(has_area?4:2));
+	result.verts.reserve(curve.verts.size()*(has_area ? 4 : 2));
-	result.vertcnt.reserve(meshout.vertcnt.size()+2);
+	result.vertcnt.reserve(curve.verts.size() + 2);
+	std::vector<IfcVector3> in = curve.verts;
 
 	// First step: transform all vertices into the target coordinate space
 	IfcMatrix4 trafo;
@@ -575,9 +555,7 @@ void ProcessExtrudedAreaSolid(const IfcExtrudedAreaSolid& solid, TempMesh& resul
 
 	vmax -= vmin;
 	const IfcFloat diag = vmax.Length();
-	
+	IfcVector3 dir = IfcMatrix3(trafo) * extrusionDir;
-	IfcVector3 min = in[0];
-	dir *= IfcMatrix3(trafo);
 
 	// reverse profile polygon if it's winded in the wrong direction in relation to the extrusion direction
 	IfcVector3 profileNormal = TempMesh::ComputePolygonNormal(in.data(), in.size());
@@ -596,8 +574,7 @@ void ProcessExtrudedAreaSolid(const IfcExtrudedAreaSolid& solid, TempMesh& resul
 			// it is essential to apply the openings in the correct spatial order. The direction	 
 			// doesn't matter, but we would screw up if we started with e.g. a door in between	 
 			// two windows.	 
-			std::sort(conv.apply_openings->begin(),conv.apply_openings->end(),
+			std::sort(conv.apply_openings->begin(), conv.apply_openings->end(), TempOpening::DistanceSorter(in[0]));
-				TempOpening::DistanceSorter(min));	 
 		}
 
 		nors.reserve(conv.apply_openings->size());
@@ -618,8 +595,8 @@ void ProcessExtrudedAreaSolid(const IfcExtrudedAreaSolid& solid, TempMesh& resul
 	std::vector<IfcVector3>& out = curmesh.verts;
 
 	size_t sides_with_openings = 0;
-	for(size_t i = 0; i < size; ++i) {
+	for( size_t i = 0; i < in.size(); ++i ) {
-		const size_t next = (i+1)%size;
+		const size_t next = (i + 1) % in.size();
 
 		curmesh.vertcnt.push_back(4);
 
@@ -652,15 +629,16 @@ void ProcessExtrudedAreaSolid(const IfcExtrudedAreaSolid& solid, TempMesh& resul
 
 		for( size_t n = 0; n < 2; ++n ) {
 			if( n > 0 ) {
-				for(size_t i = 0; i < size; ++i ) 
+				for( size_t i = 0; i < in.size(); ++i )
 					out.push_back(in[i] + dir);
-			} else {
+			}
-				for(size_t i = size; i--; )
+			else {
+				for( size_t i = in.size(); i--; )
 					out.push_back(in[i]);
 			}
 
-			curmesh.vertcnt.push_back(size);
+			curmesh.vertcnt.push_back(in.size());
-			if(openings && size > 2) {
+			if( openings && in.size() > 2 ) {
 				if( GenerateOpenings(*conv.apply_openings, nors, temp, true, true, dir) ) {
 					++sides_with_v_openings;
 				}
@@ -685,13 +663,54 @@ void ProcessExtrudedAreaSolid(const IfcExtrudedAreaSolid& solid, TempMesh& resul
 		profile->Swap(result);
 
 		boost::shared_ptr<TempMesh> profile2D = boost::shared_ptr<TempMesh>(new TempMesh());
-		profile2D->Swap(meshout);
+		profile2D->verts.insert(profile2D->verts.end(), in.begin(), in.end());
+		profile2D->vertcnt.push_back(in.size());
 		conv.collect_openings->push_back(TempOpening(&solid, dir, profile, profile2D));
 
 		ai_assert(result.IsEmpty());
 	}
 }
 
+// ------------------------------------------------------------------------------------------------
+void ProcessExtrudedAreaSolid(const IfcExtrudedAreaSolid& solid, TempMesh& result, 
+	ConversionData& conv, bool collect_openings)
+{
+	TempMesh meshout;
+	
+	// First read the profile description. 
+	if(!ProcessProfile(*solid.SweptArea,meshout,conv) || meshout.verts.size()<=1) {
+		return;
+	}
+
+	IfcVector3 dir;
+	ConvertDirection(dir,solid.ExtrudedDirection);
+	dir *= solid.Depth;
+
+	// Some profiles bring their own holes, for which we need to provide a container. This all is somewhat backwards, 
+	// and there's still so many corner cases uncovered - we really need a generic solution to all of this hole carving.
+	std::vector<TempOpening> fisherPriceMyFirstOpenings;
+	std::vector<TempOpening>* oldApplyOpenings = conv.apply_openings;
+	if( const IfcArbitraryProfileDefWithVoids* const cprofile = solid.SweptArea->ToPtr<IfcArbitraryProfileDefWithVoids>() ) {
+		if( !cprofile->InnerCurves.empty() ) {
+			// read all inner curves and extrude them to form proper openings. 
+			std::vector<TempOpening>* oldCollectOpenings = conv.collect_openings;
+			conv.collect_openings = &fisherPriceMyFirstOpenings;
+
+			BOOST_FOREACH(const IfcCurve* curve, cprofile->InnerCurves) {
+				TempMesh curveMesh, tempMesh;
+				ProcessCurve(*curve, curveMesh, conv);
+				ProcessExtrudedArea(solid, curveMesh, dir, tempMesh, conv, true);
+			}
+			// and then apply those to the geometry we're about to generate
+			conv.apply_openings = conv.collect_openings;
+			conv.collect_openings = oldCollectOpenings;
+		}
+	}
+
+	ProcessExtrudedArea(solid, meshout, dir, result, conv, collect_openings);
+	conv.apply_openings = oldApplyOpenings;
+}
+
 // ------------------------------------------------------------------------------------------------
 void ProcessSweptAreaSolid(const IfcSweptAreaSolid& swept, TempMesh& meshout, 
 	ConversionData& conv)
@@ -784,7 +803,7 @@ bool ProcessGeometricItem(const IfcRepresentationItem& geo, unsigned int matid,
 	meshtmp->RemoveDegenerates();
 
 	if(fix_orientation) {
-		meshtmp->FixupFaceOrientation();
+//		meshtmp->FixupFaceOrientation();
 	}
 
 	aiMesh* const mesh = meshtmp->ToMesh();

code/IFCUtil.h

@@ -271,6 +271,7 @@ IfcFloat ConvertSIPrefix(const std::string& prefix);
 
 // IFCProfile.cpp
 bool ProcessProfile(const IfcProfileDef& prof, TempMesh& meshout, ConversionData& conv);
+bool ProcessCurve(const IfcCurve& curve,  TempMesh& meshout, ConversionData& conv);
 
 // IFCMaterial.cpp
 unsigned int ProcessMaterials(uint64_t id, unsigned int prevMatId, ConversionData& conv, bool forceDefaultMat);

scripts/IFCImporter/entitylist.txt

@@ -11,6 +11,7 @@
 IfcAnnotation
 IfcArbitraryClosedProfileDef
 IfcArbitraryOpenProfileDef
+IfcArbitraryProfileDefWithVoids
 IfcAxis1Placement
 IfcAxis2Placement
 IfcAxis2Placement2D