assimp/code/TriangulateProcess.cpp

529 lines
19 KiB
C++
Raw Normal View History

/*
---------------------------------------------------------------------------
Open Asset Import Library (assimp)
---------------------------------------------------------------------------
2016-01-01 20:07:24 +00:00
Copyright (c) 2006-2016, assimp team
All rights reserved.
2015-05-19 03:52:10 +00:00
Redistribution and use of this software in source and binary forms,
with or without modification, are permitted provided that the following
conditions are met:
* Redistributions of source code must retain the above
copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other
materials provided with the distribution.
* Neither the name of the assimp team, nor the names of its
contributors may be used to endorse or promote products
derived from this software without specific prior
written permission of the assimp team.
2015-05-19 03:52:10 +00:00
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
2015-05-19 03:52:10 +00:00
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
2015-05-19 03:52:10 +00:00
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
2015-05-19 03:52:10 +00:00
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------
*/
/** @file TriangulateProcess.cpp
* @brief Implementation of the post processing step to split up
* all faces with more than three indices into triangles.
*
*
* The triangulation algorithm will handle concave or convex polygons.
* Self-intersecting or non-planar polygons are not rejected, but
* they're probably not triangulated correctly.
*
* DEBUG SWITCHES - do not enable any of them in release builds:
*
* AI_BUILD_TRIANGULATE_COLOR_FACE_WINDING
* - generates vertex colors to represent the face winding order.
* the first vertex of a polygon becomes red, the last blue.
* AI_BUILD_TRIANGULATE_DEBUG_POLYS
* - dump all polygons and their triangulation sequences to
* a file
*/
#ifndef ASSIMP_BUILD_NO_TRIANGULATE_PROCESS
#include "TriangulateProcess.h"
#include "ProcessHelper.h"
#include "PolyTools.h"
#include <boost/scoped_array.hpp>
//#define AI_BUILD_TRIANGULATE_COLOR_FACE_WINDING
//#define AI_BUILD_TRIANGULATE_DEBUG_POLYS
#define POLY_GRID_Y 40
#define POLY_GRID_X 70
#define POLY_GRID_XPAD 20
#define POLY_OUTPUT_FILE "assimp_polygons_debug.txt"
using namespace Assimp;
// ------------------------------------------------------------------------------------------------
// Constructor to be privately used by Importer
TriangulateProcess::TriangulateProcess()
{
2015-05-19 03:57:13 +00:00
// nothing to do here
}
// ------------------------------------------------------------------------------------------------
// Destructor, private as well
TriangulateProcess::~TriangulateProcess()
{
2015-05-19 03:57:13 +00:00
// nothing to do here
}
// ------------------------------------------------------------------------------------------------
// Returns whether the processing step is present in the given flag field.
bool TriangulateProcess::IsActive( unsigned int pFlags) const
{
2015-05-19 03:57:13 +00:00
return (pFlags & aiProcess_Triangulate) != 0;
}
// ------------------------------------------------------------------------------------------------
// Executes the post processing step on the given imported data.
void TriangulateProcess::Execute( aiScene* pScene)
{
2015-05-19 03:57:13 +00:00
DefaultLogger::get()->debug("TriangulateProcess begin");
bool bHas = false;
for( unsigned int a = 0; a < pScene->mNumMeshes; a++)
{
if( TriangulateMesh( pScene->mMeshes[a]))
bHas = true;
}
if (bHas)DefaultLogger::get()->info ("TriangulateProcess finished. All polygons have been triangulated.");
else DefaultLogger::get()->debug("TriangulateProcess finished. There was nothing to be done.");
}
// ------------------------------------------------------------------------------------------------
// Triangulates the given mesh.
bool TriangulateProcess::TriangulateMesh( aiMesh* pMesh)
{
2015-05-19 03:57:13 +00:00
// Now we have aiMesh::mPrimitiveTypes, so this is only here for test cases
if (!pMesh->mPrimitiveTypes) {
bool bNeed = false;
for( unsigned int a = 0; a < pMesh->mNumFaces; a++) {
const aiFace& face = pMesh->mFaces[a];
if( face.mNumIndices != 3) {
bNeed = true;
}
}
if (!bNeed)
return false;
}
else if (!(pMesh->mPrimitiveTypes & aiPrimitiveType_POLYGON)) {
return false;
}
// Find out how many output faces we'll get
unsigned int numOut = 0, max_out = 0;
bool get_normals = true;
for( unsigned int a = 0; a < pMesh->mNumFaces; a++) {
aiFace& face = pMesh->mFaces[a];
if (face.mNumIndices <= 4) {
get_normals = false;
}
if( face.mNumIndices <= 3) {
numOut++;
}
else {
numOut += face.mNumIndices-2;
max_out = std::max(max_out,face.mNumIndices);
}
}
// Just another check whether aiMesh::mPrimitiveTypes is correct
assert(numOut != pMesh->mNumFaces);
aiVector3D* nor_out = NULL;
// if we don't have normals yet, but expect them to be a cheap side
// product of triangulation anyway, allocate storage for them.
if (!pMesh->mNormals && get_normals) {
// XXX need a mechanism to inform the GenVertexNormals process to treat these normals as preprocessed per-face normals
// nor_out = pMesh->mNormals = new aiVector3D[pMesh->mNumVertices];
}
// the output mesh will contain triangles, but no polys anymore
pMesh->mPrimitiveTypes |= aiPrimitiveType_TRIANGLE;
pMesh->mPrimitiveTypes &= ~aiPrimitiveType_POLYGON;
aiFace* out = new aiFace[numOut](), *curOut = out;
std::vector<aiVector3D> temp_verts3d(max_out+2); /* temporary storage for vertices */
std::vector<aiVector2D> temp_verts(max_out+2);
// Apply vertex colors to represent the face winding?
#ifdef AI_BUILD_TRIANGULATE_COLOR_FACE_WINDING
2015-05-19 03:57:13 +00:00
if (!pMesh->mColors[0])
pMesh->mColors[0] = new aiColor4D[pMesh->mNumVertices];
else
new(pMesh->mColors[0]) aiColor4D[pMesh->mNumVertices];
2015-05-19 03:57:13 +00:00
aiColor4D* clr = pMesh->mColors[0];
#endif
2015-05-19 03:52:10 +00:00
#ifdef AI_BUILD_TRIANGULATE_DEBUG_POLYS
2015-05-19 03:57:13 +00:00
FILE* fout = fopen(POLY_OUTPUT_FILE,"a");
#endif
2015-05-19 03:57:13 +00:00
const aiVector3D* verts = pMesh->mVertices;
2015-05-19 03:57:13 +00:00
// use boost::scoped_array to avoid slow std::vector<bool> specialiations
boost::scoped_array<bool> done(new bool[max_out]);
for( unsigned int a = 0; a < pMesh->mNumFaces; a++) {
aiFace& face = pMesh->mFaces[a];
2015-05-19 03:57:13 +00:00
unsigned int* idx = face.mIndices;
int num = (int)face.mNumIndices, ear = 0, tmp, prev = num-1, next = 0, max = num;
2015-05-19 03:57:13 +00:00
// Apply vertex colors to represent the face winding?
#ifdef AI_BUILD_TRIANGULATE_COLOR_FACE_WINDING
2015-05-19 03:57:13 +00:00
for (unsigned int i = 0; i < face.mNumIndices; ++i) {
aiColor4D& c = clr[idx[i]];
c.r = (i+1) / (float)max;
c.b = 1.f - c.r;
}
#endif
2015-05-19 03:57:13 +00:00
aiFace* const last_face = curOut;
// if it's a simple point,line or triangle: just copy it
if( face.mNumIndices <= 3)
{
aiFace& nface = *curOut++;
nface.mNumIndices = face.mNumIndices;
nface.mIndices = face.mIndices;
face.mIndices = NULL;
continue;
}
// optimized code for quadrilaterals
else if ( face.mNumIndices == 4) {
// quads can have at maximum one concave vertex. Determine
// this vertex (if it exists) and start tri-fanning from
// it.
unsigned int start_vertex = 0;
for (unsigned int i = 0; i < 4; ++i) {
const aiVector3D& v0 = verts[face.mIndices[(i+3) % 4]];
const aiVector3D& v1 = verts[face.mIndices[(i+2) % 4]];
const aiVector3D& v2 = verts[face.mIndices[(i+1) % 4]];
const aiVector3D& v = verts[face.mIndices[i]];
aiVector3D left = (v0-v);
aiVector3D diag = (v1-v);
aiVector3D right = (v2-v);
left.Normalize();
diag.Normalize();
right.Normalize();
const float angle = std::acos(left*diag) + std::acos(right*diag);
if (angle > AI_MATH_PI_F) {
// this is the concave point
start_vertex = i;
break;
}
}
const unsigned int temp[] = {face.mIndices[0], face.mIndices[1], face.mIndices[2], face.mIndices[3]};
aiFace& nface = *curOut++;
nface.mNumIndices = 3;
nface.mIndices = face.mIndices;
nface.mIndices[0] = temp[start_vertex];
nface.mIndices[1] = temp[(start_vertex + 1) % 4];
nface.mIndices[2] = temp[(start_vertex + 2) % 4];
aiFace& sface = *curOut++;
sface.mNumIndices = 3;
sface.mIndices = new unsigned int[3];
sface.mIndices[0] = temp[start_vertex];
sface.mIndices[1] = temp[(start_vertex + 2) % 4];
sface.mIndices[2] = temp[(start_vertex + 3) % 4];
// prevent double deletion of the indices field
face.mIndices = NULL;
continue;
}
else
{
// A polygon with more than 3 vertices can be either concave or convex.
// Usually everything we're getting is convex and we could easily
// triangulate by trifanning. However, LightWave is probably the only
// modeling suite to make extensive use of highly concave, monster polygons ...
// so we need to apply the full 'ear cutting' algorithm to get it right.
// RERQUIREMENT: polygon is expected to be simple and *nearly* planar.
// We project it onto a plane to get a 2d triangle.
// Collect all vertices of of the polygon.
for (tmp = 0; tmp < max; ++tmp) {
temp_verts3d[tmp] = verts[idx[tmp]];
}
// Get newell normal of the polygon. Store it for future use if it's a polygon-only mesh
aiVector3D n;
NewellNormal<3,3,3>(n,max,&temp_verts3d.front().x,&temp_verts3d.front().y,&temp_verts3d.front().z);
if (nor_out) {
for (tmp = 0; tmp < max; ++tmp)
nor_out[idx[tmp]] = n;
}
// Select largest normal coordinate to ignore for projection
const float ax = (n.x>0 ? n.x : -n.x);
const float ay = (n.y>0 ? n.y : -n.y);
const float az = (n.z>0 ? n.z : -n.z);
unsigned int ac = 0, bc = 1; /* no z coord. projection to xy */
float inv = n.z;
if (ax > ay) {
if (ax > az) { /* no x coord. projection to yz */
ac = 1; bc = 2;
inv = n.x;
}
}
else if (ay > az) { /* no y coord. projection to zy */
ac = 2; bc = 0;
inv = n.y;
}
// Swap projection axes to take the negated projection vector into account
if (inv < 0.f) {
std::swap(ac,bc);
}
for (tmp =0; tmp < max; ++tmp) {
temp_verts[tmp].x = verts[idx[tmp]][ac];
temp_verts[tmp].y = verts[idx[tmp]][bc];
done[tmp] = false;
}
2015-05-19 03:52:10 +00:00
#ifdef AI_BUILD_TRIANGULATE_DEBUG_POLYS
2015-05-19 03:57:13 +00:00
// plot the plane onto which we mapped the polygon to a 2D ASCII pic
aiVector2D bmin,bmax;
ArrayBounds(&temp_verts[0],max,bmin,bmax);
char grid[POLY_GRID_Y][POLY_GRID_X+POLY_GRID_XPAD];
std::fill_n((char*)grid,POLY_GRID_Y*(POLY_GRID_X+POLY_GRID_XPAD),' ');
for (int i =0; i < max; ++i) {
const aiVector2D& v = (temp_verts[i] - bmin) / (bmax-bmin);
const size_t x = static_cast<size_t>(v.x*(POLY_GRID_X-1)), y = static_cast<size_t>(v.y*(POLY_GRID_Y-1));
char* loc = grid[y]+x;
if (grid[y][x] != ' ') {
for(;*loc != ' '; ++loc);
*loc++ = '_';
}
*(loc+::ai_snprintf(loc, POLY_GRID_XPAD,"%i",i)) = ' ';
2015-05-19 03:57:13 +00:00
}
for(size_t y = 0; y < POLY_GRID_Y; ++y) {
grid[y][POLY_GRID_X+POLY_GRID_XPAD-1] = '\0';
fprintf(fout,"%s\n",grid[y]);
}
fprintf(fout,"\ntriangulation sequence: ");
#endif
2015-05-19 03:57:13 +00:00
//
// FIXME: currently this is the slow O(kn) variant with a worst case
// complexity of O(n^2) (I think). Can be done in O(n).
while (num > 3) {
// Find the next ear of the polygon
int num_found = 0;
for (ear = next;;prev = ear,ear = next) {
// break after we looped two times without a positive match
for (next=ear+1;done[(next>=max?next=0:next)];++next);
if (next < ear) {
if (++num_found == 2) {
break;
}
}
const aiVector2D* pnt1 = &temp_verts[ear],
*pnt0 = &temp_verts[prev],
*pnt2 = &temp_verts[next];
// Must be a convex point. Assuming ccw winding, it must be on the right of the line between p-1 and p+1.
if (OnLeftSideOfLine2D(*pnt0,*pnt2,*pnt1)) {
continue;
}
// and no other point may be contained in this triangle
for ( tmp = 0; tmp < max; ++tmp) {
// We need to compare the actual values because it's possible that multiple indexes in
// the polygon are referring to the same position. concave_polygon.obj is a sample
//
// FIXME: Use 'epsiloned' comparisons instead? Due to numeric inaccuracies in
// PointInTriangle() I'm guessing that it's actually possible to construct
// input data that would cause us to end up with no ears. The problem is,
// which epsilon? If we chose a too large value, we'd get wrong results
const aiVector2D& vtmp = temp_verts[tmp];
if ( vtmp != *pnt1 && vtmp != *pnt2 && vtmp != *pnt0 && PointInTriangle2D(*pnt0,*pnt1,*pnt2,vtmp)) {
break;
}
}
if (tmp != max) {
continue;
}
// this vertex is an ear
break;
}
if (num_found == 2) {
// Due to the 'two ear theorem', every simple polygon with more than three points must
// have 2 'ears'. Here's definitely someting wrong ... but we don't give up yet.
//
// Instead we're continuting with the standard trifanning algorithm which we'd
// use if we had only convex polygons. That's life.
DefaultLogger::get()->error("Failed to triangulate polygon (no ear found). Probably not a simple polygon?");
2015-05-19 03:52:10 +00:00
#ifdef AI_BUILD_TRIANGULATE_DEBUG_POLYS
2015-05-19 03:57:13 +00:00
fprintf(fout,"critical error here, no ear found! ");
#endif
2015-05-19 03:57:13 +00:00
num = 0;
break;
curOut -= (max-num); /* undo all previous work */
for (tmp = 0; tmp < max-2; ++tmp) {
aiFace& nface = *curOut++;
nface.mNumIndices = 3;
if (!nface.mIndices)
nface.mIndices = new unsigned int[3];
nface.mIndices[0] = 0;
nface.mIndices[1] = tmp+1;
nface.mIndices[2] = tmp+2;
}
num = 0;
break;
}
aiFace& nface = *curOut++;
nface.mNumIndices = 3;
if (!nface.mIndices) {
nface.mIndices = new unsigned int[3];
}
// setup indices for the new triangle ...
nface.mIndices[0] = prev;
nface.mIndices[1] = ear;
nface.mIndices[2] = next;
// exclude the ear from most further processing
done[ear] = true;
--num;
}
if (num > 0) {
// We have three indices forming the last 'ear' remaining. Collect them.
aiFace& nface = *curOut++;
nface.mNumIndices = 3;
if (!nface.mIndices) {
nface.mIndices = new unsigned int[3];
}
for (tmp = 0; done[tmp]; ++tmp);
nface.mIndices[0] = tmp;
for (++tmp; done[tmp]; ++tmp);
nface.mIndices[1] = tmp;
for (++tmp; done[tmp]; ++tmp);
nface.mIndices[2] = tmp;
}
}
#ifdef AI_BUILD_TRIANGULATE_DEBUG_POLYS
2015-05-19 03:52:10 +00:00
2015-05-19 03:57:13 +00:00
for(aiFace* f = last_face; f != curOut; ++f) {
unsigned int* i = f->mIndices;
fprintf(fout," (%i %i %i)",i[0],i[1],i[2]);
}
2015-05-19 03:57:13 +00:00
fprintf(fout,"\n*********************************************************************\n");
fflush(fout);
2015-05-19 03:52:10 +00:00
#endif
2015-05-19 03:57:13 +00:00
for(aiFace* f = last_face; f != curOut; ) {
unsigned int* i = f->mIndices;
2015-05-19 03:57:13 +00:00
// drop dumb 0-area triangles
if (std::fabs(GetArea2D(temp_verts[i[0]],temp_verts[i[1]],temp_verts[i[2]])) < 1e-5f) {
DefaultLogger::get()->debug("Dropping triangle with area 0");
--curOut;
2015-05-19 03:57:13 +00:00
delete[] f->mIndices;
f->mIndices = NULL;
2015-05-19 03:57:13 +00:00
for(aiFace* ff = f; ff != curOut; ++ff) {
ff->mNumIndices = (ff+1)->mNumIndices;
ff->mIndices = (ff+1)->mIndices;
(ff+1)->mIndices = NULL;
}
continue;
}
2015-05-19 03:57:13 +00:00
i[0] = idx[i[0]];
i[1] = idx[i[1]];
i[2] = idx[i[2]];
++f;
}
2015-05-19 03:57:13 +00:00
delete[] face.mIndices;
face.mIndices = NULL;
}
#ifdef AI_BUILD_TRIANGULATE_DEBUG_POLYS
2015-05-19 03:57:13 +00:00
fclose(fout);
#endif
2015-05-19 03:57:13 +00:00
// kill the old faces
delete [] pMesh->mFaces;
2015-05-19 03:57:13 +00:00
// ... and store the new ones
pMesh->mFaces = out;
pMesh->mNumFaces = (unsigned int)(curOut-out); /* not necessarily equal to numOut */
return true;
}
#endif // !! ASSIMP_BUILD_NO_TRIANGULATE_PROCESS